DirectX 12 and WDDM 2.0: fixing the WhyNotWin11 graphics check
How to read dxdiag, why a generic display driver makes this line fail, and when the graphics hardware itself is the limit.

Windows 11 has a graphics requirement that many people never notice until a checker flags it: the graphics hardware must be compatible with DirectX 12 or later and must use a WDDM 2.0 or newer driver. WhyNotWin11 tests both on a single line, called DirectX 12 and WDDM 2 in version 2.7.0.0.
When this line fails, the cause is usually the driver rather than the hardware. This guide explains what DirectX and WDDM are, how WhyNotWin11 tests them, how to read the same information yourself with dxdiag, and how to fix a failure.
What the requirement means
DirectX 12
DirectX is Microsoft's collection of programming interfaces for graphics, video and games. For Windows 11, what matters is whether the graphics hardware supports the DirectX 12 feature set. That is described by feature levels such as 12_0, 12_1 or 12_2.
There is an important distinction:
- The DirectX version of Windows is the software runtime installed with the operating system. Windows 10 and 11 both include DirectX 12, so this number almost always reads 12.
- The feature levels of your graphics hardware describe what the chip can actually do. This is what Windows 11's requirement is about.
WDDM
The Windows Display Driver Model (WDDM) is the architecture graphics drivers use to work with Windows. WDDM 2.0 arrived with Windows 10, and Windows 11 introduced WDDM 3.x versions. A driver built for an older model, or the generic Microsoft Basic Display Adapter driver, does not meet the requirement.
How WhyNotWin11 tests graphics
WhyNotWin11 reads the DirectX feature level your graphics hardware supports and the driver model in use. Version 2.7.0.0 speeds this up by first matching known DirectX 12 capable graphics names before falling back to the slower dxdiag tool.
Possible results
| Result text | Meaning |
|---|---|
| DirectX 12 and WDDM 2 | Both requirements met |
| DirectX 12 and WDDM 3 | Both met, with a newer driver model |
| DirectX 12, but no WDDM2 | Hardware is capable, but the driver is too old or generic |
| No DirectX 12, but WDDM2 | Driver model is fine, but the hardware's feature level is too low |
| No DirectX 12 or WDDM2 | Neither requirement met |
| DxDiag Errored | The graphics information could not be read |
The program's own help text adds that cards described only as supporting the "DirectX 12 API" may fail this check, because API support is not the same as the required hardware feature level.
Step 1: Read the details with dxdiag
The DirectX Diagnostic Tool shows the same information in Windows.
- Press Win + R.
- Type dxdiag and press Enter.
- If asked whether to check for digitally signed drivers, choose Yes.
- Wait for the green progress bar at the bottom to finish.
The System tab
DirectX Version shows the version of the Windows DirectX runtime. On Windows 10 and Windows 11 it normally reads DirectX 12. This line alone does not prove your graphics hardware meets the requirement.
The Display tab
Open the Display tab (laptops with two graphics chips show Display 1 and Render or Display 2 tabs). Look at the Drivers panel on the right:
| Field | What to look for |
|---|---|
| Feature Levels | Should include 12_0 or higher |
| Driver Model | Should read WDDM 2.0 or newer, such as WDDM 2.7 or WDDM 3.1 |
| Name and Manufacturer | Identifies the graphics adapter |
| Version and Date | Shows how old the installed driver is |
If both Feature Levels and Driver Model meet the requirement, your graphics are compatible. Run WhyNotWin11 again with administrator rights; a red line may have been caused by a temporary read error.
Save a report
Choose Save All Information in dxdiag to create a text file you can share with a technician.
Step 2: Check which driver is installed
- Right-click Start and choose Device Manager.
- Expand Display adapters.
If you see Microsoft Basic Display Adapter, Windows is using a generic fallback driver. It allows a picture on screen but lacks the features of a proper driver, and it will cause this check to fail even on capable hardware.
Step 3: Install the correct driver
Desktops with a separate graphics card
Download the latest Windows 10 or Windows 11 driver from the graphics card maker's support site, using the exact model of your card.
Desktops using processor graphics
Get the graphics driver from the processor maker's support site or from the motherboard maker's support page for your board.
Laptops
Use the laptop manufacturer's support page for your exact model first. Laptop graphics drivers are sometimes customised for the model's power and display configuration. If the manufacturer's driver is very old, the graphics chip maker's generic driver is often an option.
Windows Update
Windows Update can also offer graphics drivers. Open Settings → Windows Update → Advanced options → Optional updates and look under Driver updates.
After installing, restart the PC, open dxdiag again and confirm that the Driver Model now reads WDDM 2.0 or newer.
Step 4: Laptops with two graphics chips
Many laptops combine integrated processor graphics with a separate graphics chip. Windows 11 needs at least one compatible adapter, and in most hybrid laptops the integrated graphics drive the display.
- Update both drivers.
- Check both Display and Render tabs in dxdiag.
- If one adapter shows an old driver model, it is usually the one with the outdated driver.
Special situations
Remote Desktop
When you connect over Remote Desktop, Windows uses a virtual display adapter. Since version 2.6.1.0, WhyNotWin11 makes an exception for RDP display adapters, but the clearest result comes from running it while sitting at the PC.
Virtual machines
Virtual machines use virtual graphics adapters whose capabilities depend on the virtualisation software and its settings. Results inside a virtual machine say little about the physical PC's graphics.
External monitors and docks
Docking stations and display adapters do not change the result. The check concerns the graphics processor and its driver, not the connected screen.
When the hardware really is too old
If the newest driver from the manufacturer still reports an older driver model, or Feature Levels stop below 12_0, the graphics hardware itself does not meet the requirement.
| PC type | Realistic fix |
|---|---|
| Desktop with a free PCI Express slot | Install any current low-cost graphics card with a Windows 11 driver |
| Desktop with processor graphics only | Add a graphics card, if the case and power supply allow |
| Laptop | Graphics cannot be replaced; the usual answer is a newer laptop |
When adding a card to an older desktop, check the power supply's capacity and connectors, the card's length against the case, and that the card's firmware supports UEFI if you plan to disable CSM for Secure Boot.
The display requirement
Windows 11 also lists a display requirement: a high-definition (720p) display larger than 9 inches diagonally with 8 bits per colour channel. WhyNotWin11 does not test the display, and Microsoft notes that its own PC Health Check app does not check graphics or display either, because most compatible devices meet these requirements. Almost every laptop and monitor from the last decade passes easily.
Troubleshooting summary
| Symptom | Likely cause | Action |
|---|---|---|
| "DirectX 12, but no WDDM2" | Old or generic driver | Install the current manufacturer driver |
| "DxDiag Errored" | dxdiag could not finish | Run dxdiag manually, then run WhyNotWin11 as administrator |
| Microsoft Basic Display Adapter in Device Manager | No proper driver installed | Install the manufacturer driver and restart |
| Fails only over Remote Desktop | Virtual display adapter | Run locally |
| "No DirectX 12 or WDDM2" with the newest driver | Hardware too old | Replace the card (desktop) or the PC |
Understanding feature levels
Feature levels describe groups of graphics capabilities. A device that supports a higher feature level also supports the lower ones.
| Feature level | Rough meaning |
|---|---|
| 11_0 and 11_1 | Older hardware designed for DirectX 11 era capabilities |
| 12_0 | Base DirectX 12 hardware capability |
| 12_1 | Additional capabilities such as conservative rasterisation |
| 12_2 | The capability set behind DirectX 12 Ultimate |
dxdiag lists every level the device supports, separated by commas. For the Windows 11 requirement, look for 12_0 or higher in that list.
Installing a graphics driver properly
A clean, current driver solves most failures on this line. A few habits make the process smoother.
Before you install
- Note the current driver version from dxdiag or Device Manager, in case you need to go back.
- Download the driver for your exact graphics model and for your version of Windows.
- Close games and graphics-heavy programs.
During installation
- Run the installer as administrator.
- If the installer offers a clean installation option, it removes old driver settings first. This can help when an earlier installation went wrong.
- Expect the screen to flicker or go black briefly while the driver loads.
If something goes wrong
- Open Device Manager and expand Display adapters.
- Right-click the adapter and choose Properties.
- On the Driver tab, choose Roll Back Driver if it is available.
If Windows will not display a picture after a driver change, start in Safe Mode from the recovery options and remove the faulty driver there.
Checking a laptop before buying
When choosing a used laptop, open dxdiag on the machine or run WhyNotWin11 from a USB stick. Laptop graphics cannot be replaced, so a failure on this line usually means the laptop is not a good long-term choice for Windows 11.
How the graphics requirement relates to other checks
The graphics line is independent of the processor list, TPM and Secure Boot. A PC can pass graphics and fail everything else, or the other way round. It is, however, one of the few failures that a simple driver update often fixes, so it is worth solving early when you prepare a PC for Windows 11.
Quick checklist
- dxdiag Display tab shows Feature Levels including 12_0 or higher.
- Driver Model reads WDDM 2.0 or newer.
- Device Manager does not show Microsoft Basic Display Adapter.
- WhyNotWin11 run locally, not over Remote Desktop.
Summary
Most failures on this line come from a missing or outdated driver. Read Feature Levels and Driver Model in dxdiag, install the manufacturer's current driver, and run WhyNotWin11 again locally. Only replace hardware when the newest driver still reports an older driver model.
Frequently asked questions
dxdiag says DirectX 12 on the System tab. Why does WhyNotWin11 fail?
The System tab shows the Windows DirectX runtime, not your hardware. Check Feature Levels and Driver Model on the Display tab.
Does a gaming card automatically pass?
Most graphics cards from the last decade pass once a current driver is installed. Very old cards may not.
Will updating the graphics driver affect my files?
No. A driver update changes only the graphics software. Restart after installing.
Does the graphics check matter if I use the PC only for office work?
Yes. It is part of Windows 11's minimum requirements regardless of how you use the PC.
Is DirectX 12 Ultimate required?
No. DirectX 12 Ultimate is a feature set for supported games and graphics chips. The minimum requirement is DirectX 12 compatibility with a WDDM 2.0 driver.
Why does WhyNotWin11 take longer on the graphics check sometimes?
If the program cannot match your graphics adapter quickly from its known list, it runs dxdiag in the background, which can take several seconds. Version 2.7.0.0 tries the faster match first.
Can a USB display adapter cause a failure?
USB display adapters use their own drivers. WhyNotWin11 is concerned with a compatible graphics adapter on the system; make sure your main graphics adapter has a current driver and run the check with your usual setup.
My graphics driver is from the PC maker and is very old. Is a newer generic driver safe?
Often it is, but some laptops need the maker's customised driver for features such as switching between graphics chips. Try the maker's newest version first, and keep a note of the old version so you can roll back.
Does the graphics requirement apply to virtual machines?
A Windows 11 virtual machine needs a virtual graphics adapter that its virtualisation software provides with suitable drivers. Results inside a virtual machine do not reflect your physical graphics hardware.
Can I check the driver model without dxdiag?
Yes. In Device Manager, open the display adapter's Properties and look at the Driver tab for the version and date, then compare with the manufacturer's current release. dxdiag remains the easiest way to see the exact driver model and feature levels in one place.